Kenwood Kac-8105D 1000-Watt Class D Mono Amplifier

Kenwood Kac-8105D 1000-Watt Class D Mono Amplifier Review

Kenwood Kac-8105D 1000-Watt Class D Mono Amplifier Feature

• Class D Mono Car Audio Amplifier
• 1000W Max Power
• 300 X 1 @ 4_
• 500 X 1 @ 2_
• Thermal Management System
• Speaker-level inputs with signal sensing turn-on
• Bass Boost Control
• Variable low-pass filter
• High quality speaker level input and blue illumination
• Preamp-level inputs and outputs

The KAC-8105D Class D Mono Power Amplifier has a small foot print and a mighty powerful kick. Ready to pump out 1000 Watts Max Power, the KAC-8105D includes a built-in infrasonic filter.

Packard 110-125V Start Capacitor 189-227 MFD

Packard 110-125V Start Capacitor 189-227 MFD Review

Packard 110-125V Start Capacitor 189-227 MFD Feature

• PMJ189

Packard 110-125V Start Capacitor 189-227 MFD

Pyramid PB2518 3000 Watt 2 Channel Bridgeable Mosfet Amplifier

Pyramid PB2518 3000 Watt 2 Channel Bridgeable Mosfet Amplifier Review

Pyramid PB2518 3000 Watt 2 Channel Bridgeable Mosfet Amplifier Feature

• Two Channel Amplification - Soft Turn On/Off Circuit - Remote Turn On - Power and Protection LED's - Dimensions: 10.24''W × 2.26''H × 11.02''L
• 2×1500W Max Output - 2 Ohm Stereo Stable - Heavy Duty Aluminum Alloy Heat-sink - S/N Ratio: >95DB
• 1×3000W Watts 2 Bridged - Bridgeable into 4 Ohms - Hi/Low Level Inputs - Frequency Response: 15Hz-30KHz
• Fully Adjustable Electronic Crossovers - Mosfet PWM Power Supplies - High Impedance Input - THD<0.04%
• Variable Bass Boost (0-12DB@50Hz) - Variable Gain Control - High Level Molex Input - Fully Protected Circuitry

This 2-channel Pyramid America amp is all you need to blast your music to new levels of American excess. No one does booming, ear-thrashing bass and sweet, mind-tweaking highs like Americans, so take your sound to the next level with this amp. It provides up to 1500 watts of pure patriotic power – or bridge this amp to one channel and push it to 3000 flag-waving watts! And you don’t need to worry about overheating – the entire thing is a heatsink. It’s equipped with a fully adjustable electronic crossovers for a multi-speaker setup, variable bass boost and gain control. Power and protection LEDs assure you your equipment is safe. Takes both high and low level inputs. THD < 0.04%.

Buybits Stick Anywhere Multi Surface Car Universal Phone Mount for the HTC Wildfire Mobile Smartphone

Buybits Stick Anywhere Multi Surface Car Universal Phone Mount for the HTC Wildfire Mobile Smartphone Review

Buybits Stick Anywhere Multi Surface Car Universal Phone Mount for the HTC Wildfire Mobile Smartphone Feature

• 10cm arm Super Strong Grip, works on most clean dry surfaces. Requires a flat area approx 70mm diameter so sucker grips.
• Inc: Universal Cradle fits the HTC WILDFIRE: Min Height 65mm, width 40mm to 80mm(max). Use with a case / skin or without.
• No adhesive discs, friction mounts or screws. Removable. Washable reusable suction cup. Fixes to Glass, Most Dashboards, Plastic, Painted Surfaces, WorkTops
• Idea for cars, vans, motorhomes, caravans, truck cabs, home or office.
• The new PU base creates a VERY secure grip on almost all flat, sound surfaces.

Unique washable PU suction pad will adhere to just about any clean dry surface and can be removed and applied repeatedly.
10cm arm is fully adjustable with a 65mm clear PU suction cup that's sticky to touch not adhesive.
Remove and repositioned repeatedly - no residue, won't damage a sound surface.
Sucker can be washed if it becomes dusty or dirty, rinse under the tap, leave to dry naturally and it's ready to use. Suction cup has a removal tab.
How does it works? We have taken our most popular lever release arm and have incorporated the new PU suction cup.
This PU suction pad is sticky to touch but NOT adhesive.
Select an flat area to apply the mount.
Press the arm's suction cup against a clean dry surface and push down the lever release arm to create a vacuum in the usual way but because of the new PU base, it will hold to flat, smooth or textured surfaces on both horizontal or vertical planes without having to use an additional dash disc or friction mount to ensure grip. Always check the mount is secure before inserting your device.
Universal Cradle: Includes universal phone holder suitable for use with a case. Fits phones min height 65mm & width 40-88mm min. Fold away support feet, Cushioned arms with retaining lip.View in portrait or landscape.
To remove: You MUST release the vacuum first. Lift up the lever then gently pull & lift the removal tab. This breaks the vacuum. A gentle rocking motion while lifting the removal tab works best. Don't pull at the mount, it wasn't designed to be removed that way.
If you experience problems adhering this mount to a surface please check:
That the suction cup must be allowed to dry. This reactivate the PU base. The area you apply to must be flat enough for all edges of the suction cup come into contact, undamaged, clean, dry. Not suitable for oiled surfaces.

Infinity Reference 475a High Peformance 4-Channel Full-Range Amplifier (Silver/Black)

Infinity Reference 475a High Peformance 4-Channel Full-Range Amplifier (Silver/Black) Review

Infinity Reference 475a High Peformance 4-Channel Full-Range Amplifier (Silver/Black) Feature

• 4-Channel full-range amplifier with on-board electronic crossover and variable bass boost
• 12dB variable bass boost circuit is provided to optimize the low frequency performance of your system
• Variable 12dB per octave electronic crossover allows you to optimize system tuning based on speakers and location
• Full-range preamp outputs facilitate use of multiple amplifiers without the need for adapters or signal splitters
• One-year warranty

Infinity's Reference 475a is a 4-Channel full-range amplifier with on-board electronic crossover and variable bass boost. Features include a high-output PWM MOSFET power supply for optimum power delivery into numerous impedances with low distortion, full-range preamp outputs for multiple amplifier hookups without the need for costly Y-adapters or signal splitters, a variable 12dB per octave electronic crossover allowing you to optimize system tuning based on speaker location and accompanying loudspeaker components, and plenty more.

Infinity Reference Series Amplifiers Looking for a more moving audio experience? Take Infinity car audio for a ride. Innovative materials and breakthrough engineering have always put Infinity products out in front of the competition. So expect extreme output from Reference Series amps, but be prepared for accuracy and detail that may surprise you. There is no better way to make your car audio system stand up and deliver than by powering your speakers and subs with Infinity electronics.

---

4-Channel full-range amplifier with on-board electronic crossover and variable bass boost. Click to enlarge.

Infinity 475a Features

Class D Subwoofer Amps
Efficiency is the benefit of the Infinity Reference Series Class D subwoofer amplifiers. A higher percentage of the power the amp extracts from the car's charging system is converted into output to the speakers, and less is wasted as heat. That is really important if you're trying to provide power to a 1000-watt amplifier. Class D technology turns the analog input signal into a series of pulses that can be amplified more efficiently by transistors used as switches, rather than valves. They're either on and operating at their most efficient level, or they're off. The pulses are converted back into an analog signal by an output filter.

CEA-2006-Compliant
All Infinity amplifiers are tested in accordance with CEA-2006, which provides a testing procedure to help customers compare amplifiers accurately--apples to apples. Specs are based on industry-accepted standards, rather than on the whims of amplifier companies' marketing departments. Look for the CEA-2006 logo when comparing amplifiers, to be sure you're getting the power you're paying for.

Audiophile-Quality Full-Range Amplifiers
Class AB full-range amplifiers offer audiophile quality performance and the best compromise between efficiency, low distortion, maximum available headroom and output power.

Amps That Don't Break
Infinity amplifiers are tested according to the strictest and most demanding reliability-testing regimen ever designed for car audio amplifiers. They are shaken, baked, frozen, dropped and shocked--all while they're operating. When they've passed all these tests, they are tested again. The result is a series of amplifiers that just don't break.

DBO Bass-Optimization Circuit
provides superior control and adjustability, compared to traditional bass-boost. DBO is a 2nd order high-pass filter that can be adjusted between 20Hz and 80Hz. The boost (or Q) adjustment boosts the signal above the highpass filter frequency. Used with a sealed box, it can help to increase output for more "fun" if it's set to about 45Hz. If it's used with a vented box, it should be set at or slightly below the tuned frequency of the box. That will prevent woofer unloading, and provide more output at the frequency where the box is tuned and the woofer's excursion is minimized--where it can handle more power.

Onboard Electronic Crossovers
Reference Series amplifiers include 2nd order (12dB/octave) slopes and are continuously variable from 32Hz to 200Hz.

Variable Bass-Boost
Provides up to 12dB of boost at 50Hz in the Reference Series full-range amplifiers.

Direct-Connect Terminals
Eliminate the need for additional solder-on or crimp-on terminals and provide an easy and reliable connection for power, ground and speaker wires.

Full-Range Preamp Outputs
Eliminates the need for signal splitters.

---

Infinity 475a Specifications

	Power Output:	75 watts RMS x 4 channel at 4 ohms and less than or equal to 1% THD + N 180 watts RMS x 2 channel at 4 ohms, 14.4V supply and less than or equal to 1% THD + N
	Signal-to-Noise Ratio:	85dBA (reference 1 watt into 4 ohms)
	Dynamic Power:	117 watts at 2 ohms
	Effective Damping Factor:	6.315 at 4 ohms
	Frequency Response (-3dB):	10Hz to 100kHz (-3dB)
	Maximum Input Signal:	6V
	Maximum Sensitivity:	100mV
	Dimensions (L x W x H):	14-3/16 x 9 x 2-11/16 inches (360 x 229 x 68 mm)

---

About Infinity

Infinity was founded in 1968 on a unique blend of technology, performance, and design. Today, Infinity offers three tiers of automotive speakers comparable to the best home-audio components. Infinity Kappa Perfect, Kappa, and Reference Series speakers deliver performance that rivals the best the competition has to offer.

---

What's in the Box

Infinity Reference 475a 4-Channel Full-Range Amplifier (Silver/Black), Mounting Hardware, Fuses, User's Manual

---

Infinity Amplifier Options

Infinity has approached the amplifier category with the objective of delivering maximum CEA-rated power with all the right features to get the job done. Infinity's Reference amps simply deliver.

Infinity Reference 1300a Mono Subwoofer Amplifier	Infinity Reference 1600a Mono Subwoofer Amplifier	Infinity Reference 5350a 5-Channel Amplifier	Infinity Reference 475a 4-Channel Full-Range Amplifier

The Infinity Reference 475a is a 4-Channel Full Range Amplifier capable of driving 2 sets of speakers. It has a built in 12db variable electronic crossover as well as a variable bass boost of 0 to 6db at 50Hz. The amplifier can drive four channels at 2 ohms with 90 Watts RMS. It can also be configured to drive two channels at 4 ohms with 180 Watts of power. The amplifier has a very attractive low profile. This amplifier comes with a one year parts and labor warranty. Infinity Systems is a leader in loudspeaker design for both car and home speaker systems and is part of Harman International.

Legacy LA589 800 Watts 2 Channel Bridgeable MOSFET Amplifier

Legacy LA589 800 Watts 2 Channel Bridgeable MOSFET Amplifier Review

400W x 2 Output @ 2 Ohms800W x 1 bridged Output @ 4 Ohms 2 Ohm Stable MOSFET Power Supply FULL/HPF/LPF X-over Switch Variable Hi-Pass : 40 Hz-250 Hz Variable Low-Pass : 40 Hz-250 Hz Variable Input Level (Gain) Control : 6V-200mV Bass Boost Selector : 0/+18dB Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input : 10K Ohms Line Level RCA Output Frequency Response : 15 Hz-30K Hz Signal to Noise Ratio: >95dB THD:0.1 % 2x20 Amp Maxi Type Fuse Slim Size Amplifier Design For Easy Installation Dimensions: 10.74''W x1.69''H x 7.5''L

Legacy LA1110BK 1,100-Watt Mono-Block Class-D Amplifier (Black)

Legacy LA1110BK 1,100-Watt Mono-Block Class-D Amplifier (Black) Review

Legacy LA1110BK 1100 Watt Mono-Block Class-D Amplifier (Black)

PB442X Pyramid Super Blue- 300 Watt 4 Channel Car Audio Amplifier

PB442X Pyramid Super Blue- 300 Watt 4 Channel Car Audio Amplifier Review

PB442X Pyramid Super Blue- 300 Watt 4 Channel Car Audio Amplifier Feature

• 4Ch x 75 Watts Max Output
• 4 Ohm Stable / Variable Gain
• Built-in Bass and Treble Control
• Gold Plated RCA / LED Indicator
• 3 Way Circuit Protection

Four Channel Amplification 4x75 WattsTotal Output Variable Gain Control/Remote Turn On/Off 4 Ohm Speaker Impedance Built-in Bass and Treble Control Gold Plated RCA Low Level Inputs S/N Ratio: Greater Than 85dB Frequency Response: 15-30k Hz Overload/Thermal/Short Circuit Protection Power On LED Indicator Automotive Type Fuse Protection Dimensions: 9.05W x 2.32H x 10.63D

Pioneer GM-6500F 4-Channel Bridgeable Amplifier

Pioneer GM-6500F 4-Channel Bridgeable Amplifier Review

Pioneer GM-6500F 4-Channel Bridgeable Amplifier Feature

• Amplifiers send a cleaner current to your car speakers. It means that stereo gets cleaner sound & frequency,ensuring a higher sound quality overall.
• The 4-channel GM-6500F delivers a whopping 760 watts max (60 watts x 4 at 4ohms or 85 watts x 4 at 2 ohms; 180 watts x 2 at 4 ohms)
• GM-6500F's speaker level inputs allow to connect your OEM unit (or any unit with no typical RCA-type inputs) without having to buy add-on adapters.

Pioneer 4-Channel bridgeable amplifier with 760 watts of power. Has a built-in high pass and low pass crossover at 80Hz with selectable bass boost and RCA and speakers level inputs.

Pyle PLA2678 2 Channel 4000 Watts Bridgeable Mosfet Amplifier

Pyle PLA2678 2 Channel 4000 Watts Bridgeable Mosfet Amplifier Review

Pyle PLA2678 2 Channel 4000 Watts Bridgeable Mosfet Amplifier Feature

• Maximum Power Output 2 x 2000W - 2 Ohm Stable - Custom Terminal Block for Speaker Connection - S/N Ratio: >90dB
• Bridgeable RMS Power @ 4 Ohms: 1x4000W - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection
• 2 Channel Bridgeable MOSFET Amplifier - PWM ( Pulse-Width-Modulation ) System - Input Impedance: 47K Ohms
• Frequency Response 20 Hz-50kHz (±3dB) - Glass Epoxy PCB - Soft Turn On/ Off
• Output Power @ 14.4v DC, 50Hz - Silver RCA Inputs - Advanced Protection Circuitry
• Dimensions:10.24"W x 2.21"H x 16.14"L

When power isn’t enough, you need Pyle Power. This two-channel, 4000-watt power supply is bridgeable. It’s equipped with everything you’ve come to expect from quality car amplifiers. The RCA ports are silver-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. So when what you need is power, trust Pyle Power.

Lanzar VCT2210 2000 WATTS 2 Channel High Power MOSFET Amplifier

Lanzar VCT2210 2000 WATTS 2 Channel High Power MOSFET Amplifier Review

Lanzar VCT2210 2000 WATTS 2 Channel High Power MOSFET Amplifier Feature

• 5 Position Electronic Adjustable Panel
• 16 - 9 Wide Screen
• Full Function OSD Touch Screen
• High Resolution and High Definition Picture capability
• DVD/SVCD/VCD/CD/CDR/CDR/RW Player Built-In ESP (Electronic Shock Protection)

Lanzar VCT2210 2000 WATTS 2 Channel High Power MOSFET Amplifier

Boss CX1100M Chaos Exxtreme 1100 Watts Monoblock MOSFET Power Amplifier

Boss CX1100M Chaos Exxtreme 1100 Watts Monoblock MOSFET Power Amplifier Review

Boss CX1100M Chaos Exxtreme 1100 Watts Monoblock MOSFET Power Amplifier Feature

• MAX POWER, 1 OHM, N/A; MAX POWER, 2 OHM 1100w x 1; RMS POWER, 4 OHM 250w x 1; MAX BRIDGED POWER, 4 OHM N/A
• SIGNAL-TO-NOISE RATIO, > 105 dB; THD, 0.01%
• DIMENSIONS: 11-7/8-InchW x 2-5/8-InchH x 10-9/16-InchL
• Remote subwoofer level control; Line and speaker level inputs; Variable gain control; Input sensitivity selector
• Variable lowpass crossover; Power and protection LEDs; 0-+18dB selectable bass boost; MOSFET power supply

CHAOS EXXTREME 1100 Watts, Monoblock MOSFET Power Amplifier

Pyle PLA2378 2-Channel 2,000-Watt Bridgeable Mosfet Amplifier

Pyle PLA2378 2-Channel 2,000-Watt Bridgeable Mosfet Amplifier Review

Pyle PLA2378 2-Channel 2,000-Watt Bridgeable Mosfet Amplifier Feature

• Maximum Power Output 2 x 1000W - 2 Ohm Stable - Custom Terminal Block for Speaker Connection - S/N Ratio: >90dB
• Bridgeable RMS Power @ 4 Ohms: 1x2000W - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection -
• 2 Channel Bridgeable MOSFET Amplifier - PWM ( Pulse-Width-Modulation ) System - Input Impedance: 47K Ohms
• Frequency Response 20 Hz-50kHz (±3dB) - Glass Epoxy PCB - Soft Turn On/ Off
• Output Power @ 14.4v DC, 50Hz - Silver RCA Inputs - Advanced Protection Circuitry
• Dimensions:10.24" W x 2.21" H x 11.02" L

When power isn’t enough, you need Pyle Power. This two-channel, 200-watt power supply is bridgeable. It’s equipped with everything you’ve come to expect from quality car amplifiers. The RCA ports are silver-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. So when what you need is power, trust Pyle Power.

Pyle PLAM14 20 Feet 8 Gauge 1000 Watts Amplifier Hookup For Battery Head Unit and Speakers Installation Kit

Pyle PLAM14 20 Feet 8 Gauge 1000 Watts Amplifier Hookup For Battery Head Unit and Speakers Installation Kit Review

Pyle PLAM14 20 Feet 8 Gauge 1000 Watts Amplifier Hookup For Battery Head Unit and Speakers Installation Kit Feature

• Kit includes 20 8-gauge red power wire, 4 8-gauge black ground wire
• 20 16-gauge blue remote turn-on, 20 12-gauge speaker wire, 20 right angle RCA interconnect audio cable conduit.
• 6 black split loom cable conduit, AGU type 60A gold plated fuse
• Water-resistant in-line fuse holder
• 2 ring terminals\

This Pyle Link kit has everything you need to get started installing a new head unit and speakers in your car! Comes with a variety of wires: a 20 ft. 8-gauge red power wire, 4 ft. 8-gauge black ground wire, 20 ft. 16-gauge blue remote turn-on wire, 20 ft. 12-gauge stereo speaker wire, 20 ft. stereo RCA audio cable (male-to-male) and a 6 ft. black split loom cable conduit. Also includes 2 8G ring terminals, 2 8G spade terminals, 5 14-16G spade terminals, 3 butt connectors, 20 cable ties, and 1 black grommet.

DB Link PK4Z 4 Gauge Power Series Amplifier Installation Kit

DB Link PK4Z 4 Gauge Power Series Amplifier Installation Kit Review

DB Link PK4Z 4 Gauge Power Series Amplifier Installation Kit Feature

• 1600W
• 17-Ft, 4-Gauge, Translucent Red Linkflex Power Cable
• 17-Ft Jamming Rca Cable
• 3-Ft, 4-Gauge, Black Linkflex Ground Cable
• 17-Ft, 18-Gauge, Blue Remote Wire

DB Link PK4Z 17 Feet 4 AWG Translucent Red LinkFlex Power Cable - 17 Feet Jammin‘ RCA Cable - 3 Feet 4 AWG Black LinkFlex Ground Cable - 17 Feet 18 AWG Blue Remote Wire - 25 Feet 16 AWG Speaker Wire - AGU Heat Resistant Fuse Holder - 60 Amp AGU Gold Plated Fuse - 6 Feet Split Loom - Wire Ties & Accessories